Latest News & Trends


d01 No water flows in. Open tap and press the "lnicio“ button again. This malfunction may be caused by an improper water supply hose connection
d02 Pump filter blocked. Clean the pump filter and restart the program with the “Inicio” button. Check drain hose: The connection must not be blocked
d03 Drain hose condition: The connection must not be blocked
d06 Drum blocked. Check if a small laundry item (e.g. handkerchief, sock...) has got between the detergent dispenser and drum. For access to the bottom of the dispenser
d07 Lid improperly closed. Check if the lid is closed. Start the programme using the ”lnicio“ button.

Bosch WA SERIES washer error codes

YES The washing machine door is unlocked. It is possible to add laundry.
NO Due to the high temperature in the drum, the washing machine door cannot be opened. Wait until the temperature drops.
  Due to the high level of water in the drum, the washing machine door can- not be opened. Drain the water (e.g. select the Spin or Empty programme (if only a drain cycle is required, set rpm (spin speed) to Rinse hold = 0 without final spin selected).
E:16 Laundry may become trapped. Close the washing machine door properly.
E:17 Turn on the cold water tap fully
E:29 Supply hose kinked or trapped
  Water pressure too low. Clean the filter in ?
A: 10 Turn on the hot water tap fully, supply hose kinked or trapped.
  Supply hose kinked/trapped; water pressure too low. Clean the filter.
  Hot water hose not connected; washing machine is operated using cold water only. Ignore the message; this message is only displayed for the first wash cycle.
E:18 Detergent solution pump blocked. Clean the detergent solution pump.
  Drain hose/waste pipe blocked. Clean the drain hose on the siphon.
E:23 Water in the base trough due to appliance leaking. Call after-sales service.
CL If childproof lock is active, deactivate it.
Other displays Switch off the appliance, wait for five seconds and switch it back on again. If th

Comments (0)

leave your comment