Latest News & Trends

Bosch WVT 52458 WASHER ERROR CODES

ERROR  CAUSE / ACTION
d01 No water flows in. Open tap and press the "lnicio“ button again. This malfunction may be caused by an improper water supply hose connection
d02 Pump filter blocked. Clean the pump filter and restart the program with the “Inicio” button. Check drain hose: The connection must not be blocked
d03 Drain hose condition: The connection must not be blocked
d06 Drum blocked. Check if a small laundry item (e.g. handkerchief, sock...) has got between the detergent dispenser and drum. For access to the bottom of the dispenser
d07 Lid improperly closed. Check if the lid is closed. Start the programme using the ”lnicio“ button.
A SIGNAL EMITTED IN DISPLAY FIELD POSSIBLE CAUSE ACTION
E01 (error solution E01) Door not colosed properly. Check whether laundry is trap- ped in door;
    Close the washer-dryer door.
E02 (error solution E02) Tap not turned on. Turn the tap on. Eliminate cause.
  Inlet hose kinked or pinched. Filter blocked in water inlet hose. Clean filter
  Water pressure too low. Eliminate cause.
E04 (error solution E04) Lose debris is blocking the pump; Clean the pump
  Drainage pipe blocked Clean the drainage pipe.

Comments (0)


leave your comment


Top