Beko 3905, D series, DSN series, DIS series, DFS series, DSFS series, DIN series, DL series Dishwasher Troubleshooting
| ROBLEM | POSSIBLE CAUSE | SUGGESTED ACTION |
|---|---|---|
| The cleaning results are unsatisfactory | Disorderly placement | Load correctly your dishes |
| Program selection | For products with program selecting feature, choose a extended program that washes in higher temperatures. | |
| Blocked impellers | Prior to starting the program, ensure by turning by hand that the upper and lower impellers are freely rotating.From time to time, remove the entire filter system | |
| Clogged filters | From time to time, remove the complete filter system | |
| Misplaced or displaced filters | After washing the filter system | |
| Clogged impeller holes | Take out and clean the impellers from time to time as shown in the figure. | |
| Overloading the baskets | Do not overload the baskets in excess of their capacity | |
| Detergent kept under unsuitable conditions | If you're using powder detergents, don't store them in humid places after you open their boxes. Keep them during a closed container, if possible. For ease-of-storing, we commend you to use tablet detergents. | |
| Inadequate detergent | If you're using powder detergents, adjust the quantity of detergent consistent with the soiling degree of your dishes and/or program definitions. We recommend you to use tablet deterrent for optimum results. | |
| Inadequate rinse aid | Increase rinse aid setting or add rinse aid into rinse aid compartment. | |
| Unsealed detergent dispenser lid | Always ensure that the detergent compartment lid is closed tightly after every detergent filling process. | |
| Drying | Disorderly placement | Load your dishes |
| Inadequate rinse aid | Increase rinse aid setting or add rinse aid into rinse aid compartment. | |
| Unloading the machine right after dishwashing | Do not unload your dishwasher right after washing process is completed. Slightly open the door and await evacuation of the within steam for a short time . Unload the dishes after the pieces calm down to a touchable level. Start unloading process from the lower basket. | |
| Program Selection | For products with program selecting feature, choose a extended program that washes in higher temperatures. | |
| Detergent kept under unsuitable conditions | If you're using powder detergents, don't store them in humid places after you open their boxes. Keep them during a closed container, if possible. For ease-of-storing, we commend you to use tablet detergents. | |
| Usage of silverware-kitchenware with corrupted surface quality | Silverware or kitchenware with corrupted surface quality shouldn't be washed in dishwashers. | |
| Inadequate rinse aid | Increase rinse aid setting or add rinse aid into rinse aid compartment. | |
| Insufficient water softening | In products equipped with water softening setting, water softening should be properly set in accordance with the hardness of the availability water. Add salt into the salt container, if necessary. | |
| Salt leakage | Use the supplied salt funnel while filling in softening salt. confirm that the salt box cover is tightly closed after finishing the filling process. Run a washing program to wash up the salts spilled within the machine. Recheck the salt box cover after the program is completed. | |
| Metallic Look In Bluish Rainbow Color | Excessive rinse aid | Lower rinse aid setting. |
| Glass corrosion due to soft water | In products equipped with water softening setting, water softening should be properly set in accordance with the hardness of the availability water. If your supply water is soft | |
| Kitchenware containing Aluminum | Kitchenware that contains aluminum should not be washed in dishwashers. | |
| Low water softening setting, inadequate salt | In products equipped with water softening setting, water softening should be properly set in accordance with the hardness of the supply water. Add salt into the salt container, if necessary. | |
| Detergent kept under unsuitable conditions | If you are using powder detergents, do not store them in humid places after you open their boxes. Keep them in a closed container, if possible. For ease-of-storing, we recommend you to use tablet etergents. | |
| Overloading the baskets | In order to avoid scratches and breaks in glasses and other glass tableware because of collision with each other during washing process arising from their placement, do not overload the baskets in excess of their capacity. | |
| Unsealed closing of the salt box cover* | Salt may cause oxidation on metal surfaces. Use the supplied salt funnel while filling in softening salt. Make sure that the salt box cover is tightly closed after finishing the filling process. Run a washing program to clean up the salts spilled in the machine. Recheck the salt box cover after the program is completed. |
|
| Grounding line | Check if your dishwasher is connected to the actual grounding line. Otherwise, the static electric created in the dishwasher may remove the protective coating on metal surfaces and cause blackening and corruption. | |
| Damp detergent compartment | Make sure that the detergent dispenser is well dried prior to filling it with detergent. | |
| Putting detergent in the detergent dispenser long before washing | Take care that detergent is put shortly before startup of washing. | |
| Preventing opening of detergent dispenser lid during washing | Ensure that the lid of detergent dispenser is not opened during loading the dishes so that entering of water from the impellers into it is prevented. | |
| Detergent kept under unsuitable conditions | If you are using powder detergents, do not store them in humid places after you open their boxes. Keep them in a closed container, if possible. For ease-of-storing, we recommend you to use tablet etergents | |
| Clogged impeller holes | Take out and clean the impellers from time to time as shown in the figure. | |
| Clogged filters | From time to time, remove the complete filter system | |
| Blocking I twisting of drainage hose | Connect the drainage hose | |
| Odour | Odor of new dishwasher | A new dishwasher has a peculiar odor. It will fade out after a couple of washing. |
| Clogged filters | From time to time, remove the complete filter system | |
| Leaving the dishes in the dishwasher for a long time | If you are not going to run your dishwasher immediately, load the dishes into your machine after scraping the excessive soil on them and do not tightly close the door of the machine. Every other day, perform washing without detergent in the shortest program for products with program selecting feature. | |
| Loading the dishes into the dishwasher without completely drying after washing them with hand-wash detergent. | Hand-wash detergents do not contain antifoam. There is no need to hand-wash the dishes with detergent before loading the dishes into the machine. Scraping the coarse soil on the surfaces with a tissue paper or fork will be sufficient. | |
| Spilling rinse aid in the machine while filling | Take care that rinse aid is not spilled in the machine when you are filling it. Clean any spilled amount with the help of a tissue paper/towel. | |
| Leaving the rinse aid lid open or not closing it | Rinse aid compartment should always be closed | |
| Usage of decorated glasses and porcelains | Decorated glasses and decorated luster porcelains are not suitable for dishwasher washing. Manufacturers of glassware and porcelain tableware items do not recommend washing these items in the dishwashers either. |
