Samsung Fridge PCB Repair Process
You may encounter a situation when Samsung Refrigerator doesn't get power on. this might be caused because of certain reasons mentioned below.
Below are a number of the probable reasons why there's No Power problem in Samsung Refrigerators.
They are as follows :
? the power Cord is unplugged.
? House's circuit breaker tripped.
? Frequent Power Surges.
The solutions to the above problem are subsequent :
If your refrigerator isn't powering on in the least, check the following:
? First, check to ascertain if it's plugged in.
? Check your house's breaker. confirm the circuit that the refrigerator is on isn't tripped.
? If the circuit is tripped, Samsung recommends that you simply unplug the refrigerator before resetting the circuit.
? If the circuit isn't tripped, your refrigerator needs service. Click Create Online Samsung Fridge PCB Repair Process.
When coming back from an influence outage or brownout, the facility might not restart well. this might end in the processor locking up.
Once the facility returns, follow these steps:
? you would like to first Unplug your refrigerator.
? Now, wait 30 seconds.
? Then Plug your Refrigerator Back In.
When power returns, the unit may power up properly but the display will show the particular temperature rather than the factory default set temperatures.
In this case, set the refrigerator to Power Cool and Power Freeze modes until the unit returns to the specified operating temperature.
Power surges or glitches on the facility line damages the unit either at the time of the outage or when power is restored, causing a failure that's detected when the unit's power returns. during this case, you would like to register for an Online Service Center Request below.