Bosch WVT 52458 WASHER ERROR CODES
| ERROR | CAUSE / ACTION |
|---|---|
| d01 | No water flows in. Open tap and press the "lnicio“ button again. This malfunction could also be caused by an improper water system hose connection |
| d02 | Pump filter blocked. Clean the pump filter and fresh-start the program with the “Inicio” button. Check drain hose: The connection must not be blocked |
| d03 | Drain hose condition: The connection must not be blocked |
| d06 | Drum blocked. Check if alittle laundry item (e.g. handkerchief, sock...) possesses between the detergent dispenser and drum. For access to rock bottom of the dispenser |
| d07 | Lid improperly closed. Check if the lid is closed. Start the programme using the ”lnicio“ button. |
| A SIGNAL EMITTED IN DISPLAY FIELD | POSSIBLE CAUSE | ACTION |
|---|---|---|
| E01 (error solution E01) | Door not colosed properly. | Check whether laundry is trap- ped in door; |
| Close the washer-dryer door. | ||
| E02 (error solution E02) | Tap not turned on. | Turn the tap on. Eliminate cause. |
| Inlet hose kinked or pinched. Filter blocked in water inlet hose. | Clean filter | |
| Water pressure too low. | Eliminate cause. | |
| E04 (error solution E04) | Lose debris is blocking the pump; | Clean the pump |
| Drainage pipe blocked | Clean the drainage pipe. |
